Buka jam 10.00 s/d jam 18.00 , Sabtu- Minggu libur
Beranda » PROJECTOR » PANASONIC » PANASONIC PT LB300

PANASONIC PT LB300

Ditambahkan pada: 24 December 2016 / Kategori:
Kode : -
Berat : 0.5 kg
Stok : Ready Stock
Dilihat : 119 kali
Review : Belum ada review
INFO HARGA
Silahkan menghubungi kontak kami untuk mendapatkan informasi harga produk ini.

Bagikan informasi tentang PANASONIC PT LB300 kepada teman atau kerabat Anda.

Deskripsi PANASONIC PT LB300

 

Power supply 100-240 V AC, 50/60 Hz
Power consumption 300 W
(0.5 W when STANDBY MODE set to ECO,*1 6 W when STANDBY MODE set to Normal.)
LCD panel Panel size 16 mm (0.63 in) diagonal (4:3 aspect ratio)
Display method Transparent LCD panel (x 3, R/G/B)
Pixels 786,432 (1,024 x 768) x 3, total of 2,359,296 pixels
Lens 1.2x manual zoom (throw ratio: 1.47-1.77:1), manual focus, F=2.1-2.25, f=19.11-22.94 mm
Lamp 230 W x 1,
lamp replacement cycle (lamp control: Normal/Eco1/Eco2): 5,000 hours/6,000 hours/8,000 hours*2
Screen size (diagonal) 0.76-7.62 m (30-300 in), 4:3 aspect ratio
Brightness*3
(Lamp control: Normal)
3,100 lm 2,800 lm
Center-to-corner uniformity*3 80 %
Contrast*3 10,000:1 (full on/off)
(RGB signal input, Lamp control: Normal, Color mode: Dynamic, Iris: On)
Resolution 1,024 x 768 pixels*4
Scanning frequency HDMI IN fH: 15-91 kHz, fV: 50-85 Hz, dot clock: 25 MHz-162 MHz
RGB fH: 15-91 kHz, fV: 50-85 Hz, dot clock: 162 MHz or lower
YPBPR (YCBCR)
fH: 15.75 kHz, fV: 59.94 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
fH: 31.47 kHz, fV: 59.94 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
Video/S-Video fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/SECAM/PAL-N]
Optical axis shift 6:1 (fixed)
Keystone correction range Vertical ±30°
Installation Ceiling/floor, front/rear
Terminals HDMI IN HDMI 19-pin x 1 (compatible with HDCP, Deep Color)
480i*5, 480p, 576i*5, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i,
1080/25p, 1080/24p, 1080/24sF, 1080/30p,
1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200),*6
audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
COMPUTER IN D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR /S-VIDEO x 1)
(The D-Sub/S-VIDEO conversion cable ET-ADSV is required for inputting S-VIDEO signals.)
MONITOR OUT D-sub HD 15-pin (female) x 1
VIDEO IN Pin jack x 1 (Composite VIDEO)
AUDIO 1 IN M3 x 1 (L-R x 1)
AUDIO 2 IN Pin jack x 2 (L, R x 1)
AUDIO OUT M3 x 1 (L-R x 1) for output (variable)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Built-in speaker 2 W (monaural) x 1
Noise level*3 37 dB (lamp control: Normal), 33 dB (lamp control: Eco1), 28 dB (lamp control: Eco2)
Cabinet materials Molded plastic (PC)
Dimensions (W x H x D) 335 mm x 96 mm*7 x 252 mm (13-3/16 x 3-25/32*7 x 9-29/32 in)
Weight*8 Approx. 2.8 kg (6.2 lbs)
Operating temperature 5 °C-40 °C (41 °F-104 °F)
(less than 1,400 m [4,500 ft] above sea level),
5 °C-35 °C (41 °F-95 °F)
(between 1,400 m and 2,700 m [4,500 ft and 8,800 ft] above sea level)
Operating humidity 20-80 % (no condensation)
Supplied accessories Power cord x 1*9, wireless remote control unit x 1,
batteries (AAA/R03/LR03 type x 2), computer cable (1.5 m, for VGA) x 1
*1
When the Standby mode is set to Eco, network functions such as power on over the LAN network will not operate.
Also, only certain commands can be received for external control using the serial terminal.
*2
The value for the recommended lamp replacement cycle is the maximum value, at which luminance will become 50 %.
The usage environment affects the duration of the lamp.
*3
Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4
Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
*5
Only compatible with dot clock frequency of 27 MHz (pixel repetition signal).
*6
Compliant with VESA CVT-RB.
*7
With legs at shortest position.
*8
The above values are averages. Actual values may be different according to the product.
*9
Power cords available (x 2) for Asia model only.
Caution
Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
NOTES ON USE
1 The projector uses a high-voltage mercury lamp under high internal pressure.
This lamp may break, emitting a popping sound, or fail to illuminate, due to impact or extended use.
2 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector’s exhaust openings.
• If stacking projector units, care must be taken to provide the recommended space between units. These space requirements also apply to installation
where only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the operating temperature listed in the
specifications table during use. Also, make sure the projector’s intake and exhaust openings are not blocked. Ensure there is sufficient ventilation to
prevent hot air from the exhaust openings being recirculated into the intake opening.
3 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
4 Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.

Belum ada review untuk PANASONIC PT LB300

Silahkan tulis review Anda

Your email address will not be published. Required fields are marked *

*

12345

Temukan Kami
Sidebar Kiri
Kontak
Cart
Sidebar Kanan